Yamaha DME32 - Selecting Edit Mode; Opening New Configuration Windows; Opening New Configuration Windows

Selecting Edit Mode 45
DME32—Owner’s Manual
Selecting Edit Mode
Edit mode is used to build and edit configurations. It can also be used to edit scenes
offline. See “Editing Scenes Offline” on page 76 for more information.
1 To select Edit mode, choose Edit from the Mode menu.
Alternatively, choose Edit mode from the Shortcut menu, Tool Bar, Tool Palette, or Alt
menu.
“Edit” appears in the status bar.
In Edit mode, active DME32s, active meaning connected and turned on, display the
message “EDIT CONTROL.”
2 To leave Edit mode, select another mode (e.g., Cable or Run).
The status bar indicates the newly selected mode.
Opening New Configuration Windows
New configuration windows can be opened as follows.
1 Choose New from the File menu.
A new configuration window opens.
New configuration windows are automatically assigned a numbered title, starting with
“Configuration1,” Configuration2,” and so on. When a configuration is saved, its title
changes to the name specified.