DSP-AX1/RX-V1
DSP-AX1/RX-V1
10. PRESET
This menu reserves and inhibits initialization of the back-up RAM (parameter, set menu contents, etc. for the sound
field program). The input signals are automatically identified in the priority order of AC-3 > PCM > Analog. The
signals are processed in the same way as EFFECT OFF of No.4.
RESERVED
Initialization of the back-up RAM is reserved and it is executed when the power is turned ON
after canceling DIAG. RESERVED should be selected when shipping out of the factory or
resetting RAM.
10. PRESET
INHIBIT
10. PRESET
RESERVED
INHIBIT (Initialization inhibited)
RAM initialization is not executed. Select INHIBIT to protect the values set by the user.
CAUTION : Before setting to the PRESET RESERVED, write down the existing preset memory content of the Tuner in a
table as shown below. (This is because setting to the PRESET RESERVED will cause the user memory
content to be erased.) (RX-V1 only)
● PRESET STATIONS
STATION FM FACTORY PRESET DATA (MHz)
PAGE NO. U, C, R, T R, T, L, A J
1 87.5 87.5 76.0
2 90.1 90.1 83.0
3 95.1 95.1 84.0
A/C/E 4 98.1 98.1 86.0
5 107.9 108.0 90.0
6 88.1 88.1 78.0
7 106.1 106.1 88.0
8 107.9 108.0 82.1
STATION AM FACTORY PRESET DATA (kHz)
PAGE NO. U, C, R, T R, T, L, A, J
1 630 630
2 1080 1080
3 1440 1440
B/D 4 530 531
5 1710 1611
6 900 900
7 1350 1350
8 1400 1404
Preset group
A
B
C
D
E
P1 P2 P3 P4 P5 P6 P7 P8
27
To Next Page
Loading...
Need help?
General
