Yamaha HTR-3068 User Manual

En 94
■ Network Update
Updates the firmware via the network.
Starts the process to update the unit’s firmware. For details, see “Updating the
unit’s firmware via the network” (p.99).
Displays the version of the firmware installed on the unit.
Displays the system ID number.
Bluetooth
Configures the BLUETOOTH settings.
■ Bluetooth
Enables/disables the BLUETOOTH function (p.53).
Settings
■ Bluetooth Standby
Selects whether to enable/disable the function that turns on the unit from BLUETOOTH
devices (BLUETOOTH standby). If this function is set to “On”, the unit automatically
turns on when a connect operation is performed on the BLUETOOTH device.
Settings
• This setting is not available when “Network Standby” (p.93) is set to “Off”.
Perform Update
Firmware Version
System ID
Off Disables the BLUETOOTH function.
On
Enables the BLUETOOTH function.
Off Disables the BLUETOOTH standby function.
On
Enables the BLUETOOTH standby function.
(The unit consumes more power than when “Off” is selected.)
00_RX-V479_V579_om_U.book Page 94 Wednesday, March 25, 2015 9:59 AM

Yamaha HTR-3068 Specifications

General

Receiver type	Surround
Pre-out channels	1 SW
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Total Harmonic Distortion (THD)	0.09 %
Dynamic power per channel (4 Ohm)	130 W
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	4
Audio (L/R) in	3
Composite video in	1
Digital audio coaxial in	2
Connectivity technology	Wireless
Speakers connectivity type	-
Ethernet LAN	No
Supported radio bands	AM, FM
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby Digital Plus, Dolby TrueHD
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	315 mm
Width	435 mm
Height	151 mm
Weight	7400 g