Name: Yamaha HTR-5830
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

RX-V357/HTR-5830

• Resetting the factory presets

To reset all of parameters, do the following procedure.

This procedure completely resets ALL parameters, in-

cluding the SET MENU, level, assign, and tuner presets.

Note: Only the tuner’s frequency step is not reset in this

procedure. (R, L models)

1 With the main unit in standby mode, hold down “STE-

REO (EFFECT)” key and press “STANDBY/ON” key.

Then PRESET is displayed.

2 Press “STEREO (EFFECT)” key to select the desired

setting.

RESET To reset the main unit to its factory presets.

CANCEL To cancel without making any changes.

3 Press “STANDBY/ON” key.

If you selected RESET, the main unit is reset its fac-

tory presets and switches to standby mode.

If you selected CANCEL, the main unit switches to

standby mode and nothing is reset.

Note: The setting you made are reflected the next

time this main unit’s power is turned on.

• Changing tuner’s FREQUENCY STEP (R, L models

only)

To change the tuner’s frequency step, do the following

procedure.

1 With the main unit in standby mode, hold down “STE-

REO (EFFECT)” key and press “STANDBY/ON” key.

Then PRESET is displayed.

2 Press “PROGRAM

” or “PROGRAM ” key to select

TUNER.

3 Press “STEREO (EFFECT)” key to select the desired

setting.

AM10/FM100 or AM9/FM50

4 Press “STANDBY/ON” key.

The main unit changes to standby mode.

Note: The setting you made are reflected the next

time this main unit’s power is turned on.

Other manuals for Yamaha HTR-5830

Questions and Answers:

Need help?

Do you have a question about the Yamaha HTR-5830 and is the answer not in the manual?

General