Application Guide for
Yamaha Installation Series Speakers
44
Signal Processors
When the “Installation Series Speakers” are driven in bi-amp mode, a crossover is needed to split
the LF & HF frequencies. Yamaha digital signal processors such as the DME series Digital Mixing
Engines, new DME Satellite or the SP2060 speaker processor are recommended for optimum
results. You can download dedicated processor settings for the Installation Series Speakers into
these processors from the Yamaha proaudio site (http://www.yamahaproaudio.com). This allows
highly accurate settings with just a few easy steps, providing the best speaker processing with the
least amount of effort!
DIGITAL MIXING ENGINE DME SERIES
DME64N
DME24N
DME8o-C
To Next Page
Loading...
Need help?
General