35
SEQ
Playing Back Sequence Data
1.
Check your MIDI connections.
The MIDI OUT jack of the MDF3 should
be connected to the MIDI IN jack of the
receiving device.
If you have not done so already, place a
disk containing the sequence data in the
MDF3 disk drive.
2.
Enter SEQ mode.
Press the SEQ key. The LED above the
key will light, and the name of the cur-
rently selected SEQ data file will appear
in the LCD.
3.
Select a file to transmit.
Using the FILE DATA keys, select the file
to be played back.
MIDI OUT
MDF3
MIDI cable
MIDI IN
~å
01~~~~~~SONGå01
file number file name
To Next Page
Loading...
