4-9
ENG
CYLINDER HEAD
EAS00222
REMOVING THE CYLINDER HEAD
1. Remove
9
side cowlings (left and right)
9
front cowling
9
center panels (upper and lower)
9
rear cowlings (left and right)
Refer to “COVERS” in chapter 3.
9
carburetor assembly
Refer to “CARBURETOR” in chapter 6.
9
muffler
Refer to “REMOVING THE ENGINE”.
2. Drain:
9
cooling system
Refer to “CHANGING THE COOLANT” in
chapter 3.
3. Remove:
9
water pump assembly bolts
9
water pump assembly
9
O-rings
4. Remove:
9
spark plug cap
1
9
spark plug
2
5. Remove:
9
cylinder head cover bolts
9
cylinder head cover
9
gasket
9
dowel pin
9
O-ring
To Next Page
