SPEC
GENERALSPECIFICATIONS
2-2
Model T135SE/T135S
Carburetor
Type/quantity VM22/1
Manufacturer MIKUNI
Spark plug
Type CPR8EA-9
Manufacturer NGK
Spark plug gap 0.8 – 0.9 mm (0.031 – 0.035 in)
Clutch type
Wet, multiple-disc and centrifugal automatic
Transmission
Primary reduction system Spur gear
Primary reduction ratio 69/24 (2.875)
Secondary reduction system Chain drive
Secondary reduction ratio 39/15 (2.600)
Transmission type Constant mesh 4 speed
Operation Left foot operation
Gear ratio 1st 34/12 (2.833)
2nd 30/16 (1.875)
3rd 23/17 (1.353)
4th 23/22 (1.045)
Chassis
Frame type Diamond
Caster angle 25.3°
Trail 73.0 mm (2.87 in)
Tire
Type With tube
Size front 60/100-17M/C 33P
rear 80/90-17M/C 44P
Model (manufacturer) front IRC/NF63B, Vee Rubber/V304
rear IRC/NR78Y, Vee Rubber/V304
Min. tire tread depth front 0.8 mm (0.03 in)
rear 0.8 mm (0.03 in)
Tire pressure (cold tire)
Maximum load*-except vehicle 110 kg (243 lb)
front 200 kPa (29 psi) (2.00 kgf/cm
2
)
rear 225 kPa (33 psi) (2.25 kgf/cm
2
)
* Load is the total weight of cargo, rider, passenger,and accessories.
To Next Page
