9-12
9
6. If the engine oil is at or below the mini-
mum level mark, remove the right rear
panel by removing the quick fastener
screws and bolts, and then add oil via the
oil filler hole.
Add oil a little at a time so as not to overfill be-
yond the maximum level mark.
7. Install the dipstick, and then install the
right rear panel.
8. Lower the cargo bed.
To change the engine oil (and filter)
1. Park the vehicle on a level surface.
1. Maximum level mark
2. Minimum level mark
3. Oil filler hole
1. Right rear panel
2. Quick fastener screw
3. Bolt
UBHF11E0.book Page 12 Friday, October 1, 2021 5:00 PM
To Next Page
Loading...
