EasyManua.ls Logo

Yamaha VIKING 2021 - The Front and Rear Shock Absorber Assemblies

Yamaha VIKING 2021
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-23
5
To close
Lift the tailgate to the original position, and
then hook the latches.
Lifting and lowering the cargo bed
To lift
Pull up the cargo bed release lever on the left
or right side of the vehicle, and then slowly lift
up the cargo bed until it stops.
To lower
With hands and fingers clear of pinch points,
lower the cargo bed slowly to its original po-
sition and be sure it is locked into place.
WARNING! Keep hands, body, and other
people away from pinch points when low-
ering bed. Do not hold onto the
cage/frame while closing the bed.
[EWB03260]
EBU31540
The front and rear shock absorber as-
semblies
WARNING
EWB00411
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.
Do not tamper with or attempt to open
the cylinder assemblies.
1. Cargo bed release lever
1
UBHF11E0.book Page 23 Friday, October 1, 2021 5:00 PM

Table of Contents

Related product manuals