9-44
9
4. Disconnect the negative battery lead first,
then the positive battery lead. NOTICE:
When removing the battery, the main
switch must be off, and the negative
lead must be disconnected before the
positive lead.
[ECB01002]
5. Unhook the battery bands.
6. Pull the battery out of its compartment.
To charge the battery
Remove it from vehicle and confirm the rec-
ommended charging rate as specified on
the battery itself.
Select a suitable charger and follow the
manufacturer’s instructions, or have a
Yamaha dealer charge it for you.
1. Quick fastener screw
2. Air intake duct panel
1. Positive battery lead (red)
2. Battery band
3. Negative battery lead (black)
UBHF11E0.book Page 44 Friday, October 1, 2021 5:00 PM
To Next Page
Loading...
