4
.1. Guideline for Safety Operation
The lathe is a high speed and powerful machine and can cause danger
if operate it improperly.
Before operating the lathe please read the following guidelines of
safety operation. Take care and observe to make the lathe be under
normal operation environment so as to avoid danger.
The lathe is in accordance with GB15760-1995 <General Technical
Condition of Safety Protection of Metal Cutting Machine> issued by the
state.
The manual covers information and hints necessary for proper and safe
operation of the lathe.
It is required the operator of the lathe should accept suitable technical
training before operating the machine, own skills to operate it and hold
the certificate of operation; or he should be trained under the close
supervision of somebody who can skillfully operate the machine.
The lathe should be operated under the environmental temperature of
+5°C - +40°C; the elevation up to 1000 m; the relative humidity of 50%
when ambient temperature is +40°C or higher relative humidity if
ambient temperature is lower.
The manual also covers related information for those who owns
necessary skills or appointed persons to make suitable maintenance upon
the machine.
1-1 Safety Points for Attention
1. Keep the lathe and the working area clean and in good order.
2. All guard devices and cover plates should be on the place; the side
cover should be closed.
3. Do not place any objects in the processing area of the lathe as they
may bump with rotating or moving parts.
4. Do not contact or leap over moving or rotating parts of the lathe.
Instructions Manual for CL-38 (L190)
To Next Page
Loading...