SAFETY SIGNALS
The following signals are used in this manual to indicate the severity of the risks that may be en-
countered if the warnings concerning the product are not respected :
DANGER
Dangerous situation imminent that may cause death or serious
injury.
WARNING
Potentially dangerous situation likely to cause death or serious
injury.
CAUTION
Potentially dangerous situation likely to cause slight or medium-
seriousness injury .
IMPORTANT
Remarks or instructions to be respected to ensure the completely
safe operation and maintenance of the machine.
WARNING
The operator of this machine must be competent and trained in its use.
WARNING
Never try to operate or repair the machine if you have not read and understood all the ap-
plicable warnings and usage instructions contained in this manual and on the safety signals
on this machine. Physical injury may be caused if the safety instructions are not respected.
WARNING
Never modify the design of the machine or its engine.
Never remove or deactivate the protections or safety mechanisms installed.
Any unauthorised modification to the design or use of unauthorised accessories may cause
physical damage.
In addition, in that these actions would constitute an explicit violation of the terms of the YAN-
MAR Product Warranty, the applicable warranty would also become null and void.
To Next Page
