EasyManua.ls Logo

Yanmar SV26 - Horn; Windscreen Wiper Switch and Windscreen Wiper; Ventilation Switch

Yanmar SV26
205 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Description of the driving position
20
5.2.4 Horn
Press the switch at the top of the right joystick to
activate the horn.
1= Horn
5.2.5 Windscreen wiper switch and windscreen wiper
This switch is used both for the windscreen
wipers and the washer.
1 = The windscreen wipers work.
2= Press and hold the switch to spray wiper
fluid onto the windscreen.
OFF: The windscreen wipers stop.
Check the windscreen washer fluid level
daily.
IMPORTANT
Do not press the washer command when the washer tank is empty as this may damage the
pump.
Using windscreen wipers on a dry windscreen may damage the glass. Only use the wind-
screen wipers when the windscreen is wet.
The windscreen wiper blade may freeze in cold weather. Do not try to activate it if it is fro-
zen as this may damage the windscreen wiper motor.
5.2.6 Ventilation switch
Use this switch to evacuate the air from the
cab. Move the switch to select the ventilator speed.
The selector is used to select the air volume by
selecting :
1 : Ventilator stopped.
2 : Reduced ventilator speed.
3 : High ventilator speed.
6 Heating valve, page 36

Table of Contents

Related product manuals