3 RECOMMISSIONING
WARNING
After storage of the machine at temperatures outside the machine's operating tempera-
ture range, make sure the temperature is again in the operating temperature range before
restoring the machine to working order.
Before using the machine again after a storage period of two months, do the following:
1. Remove the protections on the hydraulic cylinder rods.
2. Apply a large quantity of oil or grease to the moving part.
3. Drain the water from the fuel tank, from the engine oil casing and from the hydraulic fluid
tank by removing the drainage caps.
4. Leave the machine to warm up after you start the engine.
161
To Next Page
