2 Maintenance precautions
134
2.2.4 Dismantling the accessory
• If the scheduled task requires the dismantling of the
accessory, remove it carefully by following the instruc-
tions described in this manual.
12.1 Dismantling the accessory, page 107
• Reinstall it carefully and follow the instructions de-
scribed in this manual.
12.2 Mounting the accessory, page 108
2.2.5 Working under the machine
• Before you carry out any maintenance or repairs under the machine, place the accessory on
the ground or in its lowest position.
• Perform the machine's parking operations.
2.4.2 Stopping the engine, page 76
• Before performing any maintenance operation, remove residual pressure in the hy-
draulic circuit.
2.1.2 Removing the residual pressure, page 131
DANGER
Park the machine on flat, firm ground.
If the machine is not stable, do not carry out any
maintenance under the machine.
2.2.6 Lighting
Use flameproof lighting when checking the fuel, oil,
cooling water or battery electrolyte. If you do not, there
is a risk of fire and explosion.
To Next Page
Loading...
