2 Usage precautions
68
Braking when descending on a slope
•
When going downhill, you can automatically stop the machine by putting the travel levers in
neutral.
If the track slides
• If the tracks slide and you can not climb a slope with the travel motors alone, plant the bucket
into the ground, retract the arm and move forward. Repeat this operation as many times as
necessary.
If the engine stops
• If the engine stops when climbing an incline, position the travel levers in the neutral position
and lift the locking lever, then stop the machine and restart the engine. If the machine does not
start, pull the locking lever and check the fuel level.
To Next Page
Loading...
