Yaohua Weighing System XK3190-C602 - Inquiry Parameters

X K 3 1 9 0－C 602
next parameter.
In the following parameters, the italic letters “ABCDEF” in “indicator display” represent that
the indicator displays the values of parameters A, B, C, D, E, and F at the same time. “*”, “**”,
“******”, and “**.**.**” represent that it only displays the value of one parameter. The lower
line in the indicator display shows the DOS prompt. In the DOS prompt, letter M is displayed as
“ ”, and letter W is displayed as “ “. “【SET 1】 parameter 13A” is the parameter A in
parameter number 13 in table 4-3.
Following is the introduction of parameter according to the group of parameters setting.
【SET 0】inquiry parameters
Refer to table 4-3 or 4-4 respectively according to the different【SET 1】 parameters 13
A:
Table 4-1【SET 0】Parameter Table of Quantitative scale
(when 【SET 1】parameter 13A is set as 0 or 1 in table 4-3)
Parameter
Indicator
display
Parameter explanation Remarks
1
[**.**.**]
[dAtE ]
Current date setting
2
[**.**.**]
[tIME ]
Current time setting
If time or date is
modified, it still shows
current parameter after
pressing【input】
b
utton,
or else, it will go to the
next parameter.
3
[******]
[n A]
Accumulated times
A—printing option
(0: no printing, 1: printing
accumulative data, 2: printing all
data in memory)
Not to be modified,
only for inquiry.
When A selects 1 or 2,
press【input】
b
utton to
start printing, press
【stop】
b
utton to stop
printing.