D (3) Shaft Extension of Straight Shaft
SERVOMOTOR proper is the same dimensions as standard SERVOMOTOR in S series except for dimension L.
See Par. 8.3 (i). Details of shaft extension are shown below:
• With brake • With brake • With brake
Type USASEM-O8Ar_-]2OB Type USASEM-15Ar--]2OB Type USASEM-30Ar_-]2OB
(L)365.5
(L)287 _" (14.390). (L)418
3(0.i_ o_ 8(0"24)-_A-_l 6(0.24)_
12 NON-ROTATION
_o_
(4) Shaft Extension of Straight Shaft with Keyway
SERVOMOTOR proper is the same dimensions as standard SWEVOMOTOR in S series but dimensions L of type
USASEM-08 A[II]2K[II] or higher is the different dimensions. See Par. 8.3 (1). Details of shaft extension are shown
below.
• Without brake • Without brake • Without brake • With brake
Types USASEM-O3A[-]2K, Types USASEM-O3Ar_-]2KB, Type USASEM-08A[_]2K Type USASEM-O8Ar_-]2KB
D .
-OSA[-_2K -OSA_-]2KB
o2 o_ (L)239(9.409}1 (L)287(11.299)--_
°°' °
3(0.118: 3(0.1l$ _ _" _ _ _
0.197) _, (0197)
• Type USASEM-15A[-]2K (Without brake) • Type USASEM-30A[-i2K (Without brake)
Type USASEM-15A[_-]2KB (With brake) Type USASEM-30A[-]2KB (With brake)
(L)365.5(14.390)t (L)418(16.457)t_
(L)305.5, (L)352*
(12.028) (13.858)
-- *7¢_ g
113_1
6j0.236)
-57 -
To Next Page
Loading...
Need help?
General
