YASKAWA CIMR-ACA4011 - Standard MXC Specifications; Specifications by Model

9-2
Standard MxC Specifications
The standard MxC specifications are listed by capacity in the following tables.
 Specifications by Model
Specifications are given by model in the following tables.
200 V class
* The maximum applicable motor output is given for a standard 4-pole Yaskawa motor. When selecting the actual motor and MxC, be sure that the MxC's
rated current is applicable for the motor's rated current.
400 V class
* 1. The maximum applicable motor output is given for a standard 4-pole Yaskawa motor. When selecting the actual motor and MxC, be sure that the MxC's
rated current is applicable for the motor's rated current.
* 2. Under development.
Table 9.1 200 V Class MxCs
Model Number CIMR-ACA 25P5 2011 2022 2045
Max applicable motor output (kW)
*
5.5 11 22 45
Output
ratings
Rated output capacity (kVA) 9 17 33 63
Rated output current (A) 27 49 96 183
Max output voltage (V) Ratio of input voltage (Input voltage × 0.95)
Max output frequency (Hz) Frequencies supported up to 120 Hz using parameter setting
Power
supply char-
acteristics
Rated voltage (V)
Rated frequency (Hz)
3-phase, 200/208/220 VAC, 50/60 Hz
Allowable voltage fluctuation + 10%, - 15%
Allowable frequency fluctuation ±3% frequency fluctuation rate, 1 Hz/100 ms or less
Table 9.2 400 V Class MxCs
Model Number CIMR-ACA 45P5 4011 4022
4045 4075
*2
Max applicable motor output (kW)
*1
5.5 11 22 45 75
Output
ratings
Rated output capacity (kVA) 10 19 36 67 114
Rated output current (A) 15 27 52 92 157
Max output voltage (V) Ratio of input voltage (Input voltage × 0.95)
Max output frequency (Hz) Frequencies supported up to 120 Hz using parameter setting
Power
supply char-
acteristics
Rated voltage (V)
Rated frequency (Hz)
3-phase, 380, 400, 415, 440, 460 or 480 VAC, 50/60 Hz
Allowable voltage fluctuation + 10%, - 15%
Allowable frequency fluctuation ±3% frequency fluctuation rate, 1 Hz/100 ms or less