YASKAWA CIMR-ACA4011 - PG Speed Control Card Terminals and Specifications

Installing and Wiring Option Cards
2-27
 PG Speed Control Card Terminals and Specifications
The terminal specifications for the PG Speed Control Cards are given in the following tables.
PG-B2
The terminal specifications for the PG-B2 are given in the following table.
Table 2.12 PG-B2 Terminal Specifications
Terminal No. Contents Specifications
TA1
1
Power supply for pulse generator
12 VDC (±5%), 200 mA max
2 0 VDC (ground for power supply)
3
A-phase pulse input terminal
H: +8 to 12 V
L: +1 V max
Maximum response frequency: 30 kHz
4 Pulse input common
5
B-phase pulse input terminal
H: +8 to 12 V
L: +1 V max
Maximum response frequency: 30 kHz
6 Pulse input common
TA2
1
A-phase monitor output terminal
Open collector output, 24 VDC, 30 mA max
2 A-phase monitor output common
3
B-phase monitor output terminal
Open collector output, 24 VDC, 30 mA max
4 B-phase monitor output common
TA3 (E) Shield connection terminal -