3-8
Note: When changing the display with the up arrow and down arrow keys, the next display after the one for the last parameter number will be the one for the
first parameter number. For example, if the up arrow key is pressed when U1-01 is displayed, the last parameter will be displayed instead of U1-02.
This is indicated in the figures by the letters A and B and the numbers 1 to 6.
The display for the first monitor parameter (frequency reference) will be displayed when power is turned on.
The monitor item displayed at startup can be set in o1-02 (Monitor Selection after Power Up).
Operation cannot be started from the mode selection display.
To Next Page
Loading...