18
Do not replace the front cover with the digital operator connected. The digital operator will not
be connected to the inverter. Replace the front cover first and then install the digital operator
on the cover. See Par. 2.1 for replacing the digital operator.
2.3 CHOOSING A LOCATION TO MOUNT THE INVERTER
To ensure proper performance and long operating life, follow the recommendations below when
choosing a location for installing the VS-686SS5. Make sure the inverter is protected from the
following conditions:
V Extreme cold and heat.
Use only within ambient temperature range: -10_C to +40_C
V Rain, moisture. (For enclosed wall-mounted type)
V Oil sprays, splashes
V Salt spray.
V Direct sunlight. (Avoid using outdoors.)
V Corrosive gases or liquids.
V Dust or metallic particles in the air. (For enclosed wall-mounted type)
V Physical shock, vibration.
V Magnetic noise. (Example: welding machines, power devices, etc.)
V High humidity.
V Radioactive materials.
V Combustibles: thinners, solvents, etc.
NOTE
To Next Page
Loading...
Need help?
General