YASKAWA E-7 Series User Manual

4 Parameter Copy Mode
4.2.1 Read-out Parameters from SERVOPACK (SERVO → OP)
4-4
4
Press the
Key.
The display changes to the execution dis-
play.
5
Press the Key to start reading
parameters from the SERVOPACK.
Note: Press the
Key not to exe-
cute reading.
The display returns to the parame-
ter block selection display.
6
When the parameters have been read out
from the SERVOPACK, “Completed” is
displayed.
7
When the parameters were read out and
“Completed” is displayed, the display
returns to the parameter block selection
display. At this moment, the SERVO-
PACK model number is displayed for the
selected block (“SGDV-R70” in the dis-
play on the left).
8
Press the
Key. The display returns
to the parameter copy mode menu dis-
play.
(cont’d)
Step Display after Operation Keys Operation
00:∗∗∗∗
Start : [READ]
Return: [MODE]
BB − SERVO→ OP−
00:∗∗∗∗
Reading
Parameters..
BB –SERVO→ OP–
<< SERVO >>
00:∗∗∗∗
Completed
BB − SERVO→ OP−
00:SGDV− R70
01:∗∗∗∗
02:∗∗∗∗
03:∗∗∗∗
BB − SERVO→ OP−
BB − COPY−
1:SERVO→ OP
2:OP→ SERVO
3:VERIFY
4:LIST

YASKAWA E-7 Series Specifications

General

Brand	YASKAWA
Model	E-7 Series
Category	Servo Drives
Language	English