YASKAWA GA800 Series - Removing and Reattaching Drive Covers (Procedure B)

3 Mechanical Installation
22 YASKAWA TOEPC71061779B GA800 Drive Installation Manual
Model
Est. Weight
kg (lb)
2110 22.0 (48.5)
2138 25.0 (55.11)
2169 39.0 (85.98)
2211 40.0 (88.18)
Model
Est. Weight
kg (lb)
2257 69.0 (152.12)
2313 69.0 (152.12)
2360 117.0 (257.94)
2415 120.0 (264.55)
Table 3.13 400 V Class (IP55/UL Type 12 Heatsink External Mounting)
Model
Est. Weight
kg (lb)
4002 3.5 (7.72)
4004 3.5 (7.72)
4005 3.5 (7.72)
4007 3.9 (8.6)
4009 3.9 (8.6)
4012 3.9 (8.6)
4018 4.2 (9.26)
4023 4.2 (9.26)
4031 6.0 (13.23)
4038 6.0 (13.23)
4044 8.0 (17.64)
4060 13.0 (28.66)
4075 17.0 (37.48)
Model
Est. Weight
kg (lb)
4089 22.0 (48.5)
4103 27.0 (59.52)
4140 41.0 (90.39)
4168 42.0 (92.59)
4208 74.0 (163.14)
4250 74.0 (163.14)
4302 74.0 (163.14)
4371 123.0 (271.16)
4414 127.0 (279.98)
4477 200.0 (440.92)
4568 200.0 (440.92)
4605 200.0 (440.92)
4720 213.0 (469.58)
◆ Install the Gasket
Cut an opening in the enclosure panel before you install the gasket. Refer to Panel Cut-Out Dimensions (IP55/UL
Type 12 Heatsink External Mounting) on page 18 for more information.
1. Install the upper and lower gaskets around the cut opening of the enclosure panel and then install the left and
right gaskets.
Overlap the ends of the left and right gaskets by 2 mm (0.08 in) over the upper and lower gaskets.