5 Specifications
66 YASKAWA TOEPC71061779B GA800 Drive Installation Manual
3. Connect the fan cable to the fan connector.
A - Fan cable
B - Circuit board cooling fan unit
C - Fan connector
Figure 4.74 Connect Cooling Fan Connectors
4. Install the drive cover.
5. Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the cooling fan operation
time.
◆ Replace Gasket
If there is damage to the gasket, replace it with the replacement gasket.
1. Use a plastic scraper to remove the damaged gasket.
Note:
Do not scratch the mounting surfaces.
2. Remove the adhesive cover from the replacement gasket.
3. Install the replacement gasket.
Align the screw holes on the replacement gasket with the holes on the enclosure panel or a fan replacement
service panel.
5 Specifications
◆ Common Drive Specifications
Note:
• To get the OLV, CLV, and AOLV specifications, do Rotational Auto-Tuning.
• To get the longest product life, install the drive in an environment that meets the necessary specifications.
To Next Page
Loading...
