3 Mechanical Installation
YASKAWA TOEPC71061779B GA800 Drive Installation Manual 23
A - Enclosure panel
B - Upper and lower gasket
C - Left and right gasket
Figure 3.13 Install the Gasket
2. Push the overlapped part of the gasket and make a flat surface.
Make sure that there are no gaps between the gaskets.
A - Upper and lower gasket B - Left and right gasket
Figure 3.14
◆ Installation Procedure
■
Install the Drive (Procedure A)
Cut an opening in the enclosure panel before you install the attachment. Refer to Panel Cut-Out Dimensions (IP55/UL
Type 12 Heatsink External Mounting) on page 18 for more information.
To Next Page
Loading...
