4 Maintenance
36 YASKAWA TOEPC71061779B GA800 Drive Installation Manual
Remove a Fan
1. To remove the fan finger guard from the drive, push the hooks on the left and right sides of it and pull up.
A - Fan finger guard
Figure 4.14 Remove the Fan Finger Guard
2. Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling fan
Figure 4.15 Remove the Cooling Fans
Install Fans
Reverse the removal procedure to install a cooling fan.
1. Connect the drive and the fan connectors.
Figure 4.16 Connect the Power Supply Connector
To Next Page
Loading...
