3 Operations Related to Relative Jobs
DX100 3.5 Relative Job Operation Method
3-12
156191-1CD
HW0482494
3.5.1 Previous Step Regarded (Constant B-axis Sign)
This method allows movement to the specified step in relation to the B-
axis angle of the previous step. During operation, movement is made
keeping the B-axis angle sign (+/-) constant so that it does not change.
Therefore, it is used for a job of which the B-axis does not pass the point
0°.
If a job of which the B-axis passes the point 0° is executed, the angle of
the B-axis stays unchanged even when it should be changed, resulting in
the R-axis turning to the position opposite by 180°.
To Next Page
Loading...
