4 I/O Signal Allocation
4.2 Setting of Option Board and I/O Module
4-15
HW1485152
HW1485152
6. Select “PN-2-PE”.
– The PN-2-PE setup display appears.
– Set the following items:
• “PN-2-PE”: whether to use the PN-2-PE board or not
• “IO SIZE”: the I/O size (byte)
– Explanation of Setup Items
(1) PN-2-PE
Sets whether to use the SST-PN-2-PE board or not. Set “USED”.
(2) IO SIZE (byte)
Sets the I/O size (in byte) reserved for I/O.
Set the I/O size that was allocated in chapter 4.1 “Setting of the
SST-PN-2-PE Board” .
7. Press [ENTER].
– The confirmation dialog box appears.
To Next Page
Loading...
