5 Installation Procedure
22 YASKAWA ELECTRIC SIEP C730600 89C YASKAWA AC Drive Option SI-EP3 Technical Manual
Communication Cable Topology
The option modular connector CN1 port 1 and port 2 act as a switch to allow for flexibility in cabling topology. Users
may employ a traditional star network topology using a single communication cable port on the option.
Users may also choose to employ a ring topology using both communication modular connector ports on the option and
reduce the requirements of PROFINET switch ports.
Figure 16
Figure 17 Topology Options
GSD Files
To facilitate network implementation, obtain a GSD file from one of the following websites depending on your region:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Check the back cover of these manuals.
For questions, contact Yaskawa or a Yaskawa representative.
PLC
SWITCH
PLC
Drive
DriveDriveDrive
DriveDrive
To Next Page
Loading...
