YASKAWA U1000 - Page 108

Drive Model
Wire Gauge
(AWG, kcmil)
Screw
Size
Crimp Terminal
Model Number
Tool
Insulation Cap
Model No.
Code
<1>
R/L1, S/L2, T/L3
U/T1, V/T2, W/T3
Machine No. Die Jaw
4o0590
3/0
M12
80-12
YF-1
YET-300-1
TD-323
TD-312
TP-080 100-051-268
4/0 R100-12
TD-324
TD-312
TP-100 100-051-270
250
<2>
R150-12
TD-325
TD-313
TP-150 100-051-273
300 R150-12 TP-150 100-051-273
<1> Codes refer to a set of three crimp terminals and three insulation caps. Prepare input and output wiring using two sets for each connection.
<2> Recommended wire gauges. Refer to local codes for proper selections.
Note: Use crimp insulated terminals or insulated shrink tubing for wiring connections. Wires should have a continuous maximum allowable
temperature of 75 °C (167 °F) 600 Vac UL-approved vinyl-sheathed insulation.
Drive Models 4o0720 to 4o0930
Table i.43 Closed-Loop Crimp Terminal Size
Drive Model
Wire Gauge
(AWG, kcmil)
Screw
Size
Crimp Terminal
Model Number
Tool
Insulation Cap
Model No.
Code
<1>
X, Y, Z
U/T1, V/T2, W/T3
Machine No. Die Jaw
4o0720
1/0
M12
R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 70-12
TD-322
TD-311
TP-080 100-054-036
4/0 R100-12
TD-324
TD-312
TP-100 100-051-270
250 R150-12
TD-325
TD-313
TP-150 100-051-273
300
<2>
R150-12 TP-150 100-051-273
4o0900
1/0
M12
R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 70-12
TD-322
TD-311
TP-080 100-054-036
3/0 80-12
TD-323
TD-312
TP-080 100-051-268
4/0
<2>
R100-12
TD-324
TD-312
TP-100 100-051-270
250 R150-12
TD-325
TD-313
TP-150 100-051-273
300 R150-12 TP-150 100-051-273
4o0930
1/0
M12
R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 70-12
TD-322
TD-311
TP-080 100-054-036
4/0
<2>
R100-12
TD-324
TD-312
TP-100 100-051-270
250 R150-12
TD-325
TD-313
TP-150 100-051-273
300 R150-12 TP-150 100-051-273
<1> Codes refer to a set of three crimp terminals and three insulation caps. Prepare input and output wiring using two sets for each connection.
<2> Recommended wire gauges. Refer to local codes for proper selections.
Note: Use crimp insulated terminals or insulated shrink tubing for wiring connections. Wires should have a continuous maximum allowable
temperature of 75 °C (167 °F) 600 Vac UL-approved vinyl-sheathed insulation.
i.9 Standards Compliance
108
YASKAWA ELECTRIC TOEP C710636 04D U1000 Industrial MATRIX Drive Quick Start Guide