YASKAWA YASNAC i80 - Module and Unit Replacement Procedures

c Procedure for Displaying 1/0 Signals
~ This unit permits any number to be selected to
display 1/0 signals.
First, depress the
n
o
key to move the cursor to a
desired number,
or search for a desired number to
move the cursor that number.
❑ Depress the -l function selection soft key, and
“*” and the number of selected numbers will be
displayed.
~ Select the numbers to be displayed by repeating
steps ~ and ❑ .
0
H
(a)
(b)
(c)
(d)
-.
Up to 10 numbers can be selected.
Depress the
m
function selection soft key,
m
and only a selected number will be displayed.
Depressing the
E
function selection soft key
%
returns control to the overall display screen .
Depressing the
E
w
function selection soft key
cancels all selections.
Moving the cursor to the number already selected
and depressing the ~ function selection soft
key cancels selection of that number only.
133