YASKAWA YASNAC i80 - NC System Software

(5) NC System Software
YASNAC i80 software is identified by a system
number and version number.
(a) System Number (NC: [1;::[::2[: -[1[: )
A system number denotes the number of the system
software and consists of five integer digits and a
revision number of two digits.
The system number of NC basic software is
displayed on the initial screen at power on.
YASNAC
i 80
** SELF TESTING!! ~~
/
NC : 01271–00
Fig. 4.1 NC Screen at Power on
Optional software is also assigned a system number.
Examples:
Communication module
PLC ladder
ACGC application
(b) Version Number (COM: V[~[O.~I;[ll)
A version number denotes the number of the
software of each CPU of the NC basic section , and
-.
consists of two integer digits and two fractional
digits.
73