2.3 CONTROL PANEL
This section explains
YASKAWAIS
standard
cabinet. For cabinets customized for customers,
refer to the manual issued by machine
manufacturer.
(1) Checks for Tight Closing
of Doors
(daily)
~
(a)
(b)
The control panal is con-
structed as a dust-proof,
sheet-steel enclosure with
n
gasketed doors so as to
keep out dust and oil mists.
Keep each door tightly
closed at all times.
o
After inspecting the con-
trol with the door open,
7
close the door and fasten
door locks (two per door)
securely using the key
o
~
m
&
provided (No.
YEOO1)
.
~
DOOR
When opening or closing,
insert the key all the way
into the keyhole and turn
until it clicks (approximately
a quarter-turn) .
The key
can be removed from an
open or closed position.
OPEN POSITION
CLOSEDPOSTON3
&.LosEDposToN
CLOSED
t
OPEN POSITION
Left - Hand Hinged Door
Right-Hand Hinged
Door
Movable part “a “
is notched horizontally, . . . . . .
closed
Movable part “a “ is notched vertically. . . . . . .
Opn
60
q
a.
If the optional door interlocking switch is
provided, opening the door shuts off the
main power supply and stops all operations.
Fig. 2.2
Door Lock
To Next Page
Loading...