2.5 BATTERY
o
Checking
Battery
Make sure that “BAT” is not
displayed on the lower right
portion of the CRT screen at
power ON.
If it is displayed,
the battery must be replaced
within a month.
CTOR
\
YASNAC
r]
BAT
No commercially available
batteries can be used.
When replacing the battery,
be sure to contact your
YASKAWA representative.
x
<Replacing Procedure>
Depress the POWER OFF
o
@
pushbutton.
If a door interlock switch is
provided, turn it
OFF. The
power can be turned
ON,
with the door open.
Open the door so that the
NC rack (model:
JZNC-IRK
[~~[~j[~:
)
is visible.
Turn power
ON.
Check if the LED on the
model JANCD-FC200, model
JANCD-
FC300B and model JANCD-FC400
boards goes ON.
If the battery must be replaced,
the LED goes ON.
63
To Next Page
Loading...