(d) Move the cursor to the parameter number to be
changed, by one of the following operations:
Enter a parameter
number.
(e) Parameter numbers are of bit type, or byte,
word,
and double-word types, depending on the numbers.
q
8.
For details of parameter numbers, refer to Section 9
“pARAMETER
NUMBERS” of Appendix
(TOE-C843-11.31)
of
YASNAC
i80M Instruction Manual or Appendix (TOE-C843-
11.21) of
YASNAC
i80L Instruction Manual.
. For bit type
—(f]
● For byte, word, and
double-word types —
(h)
(f) Depress the
LI
IN$RT
(p’..
‘r
F
.,~,,cursor
key.
The cursor moves to the desired bit position,
207
To Next Page
Loading...