Yealink CP925 - Placing a Call with a Speed Dial Key; Placing a Call Back to the Last Incoming Number; Dialing a Hotline Number

Yealink CP925 User Guide
16
Procedure
1.
Do one of the following:
l
Select > New Call. The active call is placed on hold.
l
Select Hold to place the original call on hold.
Select > New Call.
2.
Enter the desired number or select a contact.
3. Select Send ( ).
Placing a Call with a Speed Dial Key
You can quickly dial a number by using a Speed Dial key.
Procedure
1.
1.
Tap Dsskey.
2.
Long tap the desired line key.
3. Select SpeedDial from the Type field.
4. Select the desired line from the Account ID field.
5.
Do one of the following:
l
(Optional.) Enter the string that will appear on the phone screen in the Label field.
Enter the contact number you want to dial out directly in the Value field.
You can also enter the contact number with the DTMF sequence that you want to send in the Value field. The
contact number and DTMF sequence are separated by commas. One comma stands for 500 milliseconds.
For example, 1234,,123# means the phone dials out the number 1234 first, then after the call is set up for 1
second, it sends the DTMF sequence 123# to the remote party.
l
Select and select the desired contact.
6.
Select .
Placing a Call Back to the Last Incoming Number
You can redial the last incoming number quickly by using a Recall key.
Procedure
1.
1.
Tap Dsskey.
2.
Long tap the desired line key.
3. Select Key Event from the Type field.
4. Select Recall from the Key Type field.
5. (Optional.) Enter the string that will appear on the phone screen in the Label field.
6.
Select .
Dialing a Hotline Number
When the phone is off-hook, it will dial out the hotline number automatically after the designated delay time.
Procedure
1. Go to More > Features > Hot Line.
2.
Do one of the following:
l
Enter the desired number in the Hotline Number field.
l
Select and select the desired contact.