Yealink CP925 - Setting a Ring Tone for a Contact; Disabling the Key Tone; Enabling Touch Tone

Yealink CP925 User Guide
72
Note: You can only set a ring tone for a group that is added manually.
Procedure
1.
Select > Local Directory.
2.
Select after the desired group, and then select Ring.
3.
Select the desired ring tone.
If Auto is selected, this group uses the ring tone according to the default priority.
If a specific ring tone is selected, this group uses the ring tone according to the priority: Contact ring tone>Group
ring tone.
4. Select OK.
Setting a Ring Tone for a Contact
You can select a unique ring tone for various contacts in your Local Directory. This helps you quickly identify callers
according to the ring tones.
Procedure
1.
Select .
2. Select Local Directory to select the desired contact group.
3.
Tap the desired contact and select .
4. Select the desired ring tone from the Ring field.
If Auto is selected, the contact uses the ring tone according to the default priority.
5. Select Done.
Disabling the Key Tone
If you disable the key tone, the phone will not produce a sound when pressing the keypad keys.
Procedure
1. Go to More > Basic > Sound > Key Tone.
2. Turn off Key Tone.
3.
Select .
Enabling Touch Tone
If you enable touch tone, the phone will produce a sound when you tap an option on the phone screen.
Procedure
1. Go to More > Basic > Sound > Touch Tone.
2. Turn on Touch Tone.
3.
Select .