Yealink CP925 - Ending Calls; Redialing a Call Automatically

Yealink CP925 User Guide
22
1. Tap More > DND when the phone is idle.
The DND icon disappears from the status bar.
Ending Calls
You can end the current call at any time.
Procedure
1.
Select .
Redialing a Call Automatically
You can set the phone to redial a phone number automatically when you call a contact and the contact’s line is
unavailable.
Procedure
1. Go to More > Features > Auto Redial Setting.
2. Turn on Auto Redial.
3. Enter the desired time (between 1 and 300 seconds) in the Redial Interval field.
4. Enter the desired times (between 1 and 300) in the Redial Times field.
5.
Select .
When you dial a number but fail to establish a call, the phone prompts the failure reason and then prompts whether
to auto redial the contact, select OK to activate auto redial.
The phone screen displays the redial times and interval. The phone will retry as many times as configured until the
callee answers the call.