Yealink CP925 - Advanced Call Features

Call Features
35
Sending Pages by a Paging List Key
You can send a paging by using the Paging List key when the phone is idle.
Before You Begin
You need to set a Paging List key in advance.
Procedure
1.
Tap the Paging List key when the phone is idle.
2.
Select the desired paging group.
Both your phone and receiver’s phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver’s phone in the speakerphone (hands-free) mode.
Related Topic
Setting a Paging List Key
Deleting a Paging Group
You can delete any group from the paging group list.
Procedure
1.
Tap the Paging List key when the phone is idle.
If the Paging List key is not set, you can also go to More > Features > Paging List.
2.
Select after the desired paging group.
3. Select Delete.
The phone prompts you to delete the paging group or not.
4. Select OK.
If you want to delete all paging groups, you can tap on the top-right of the phone screen.
Receiving Multicast Paging
Your system administrator has set a listening paging group for you, you can automatically receive a paging call
when the phone is idle.
When there is a voice call or a paging call in progress, the phone handles the new paging call differently according
to the multicast listening settings configured by your system administrator.
Managing a Paging Call
During a paging call, you can manage it manually at any time.
Procedure
l
Select Hold to place the current paging call on hold.
The paging call is placed on hold and the receiver releases the session.
l
Select Resume to resume the held paging call.
The multicast RTP session is re-established.
l
Select DND to enable or disable DND mode.
l
Select Mute to mute the multicast RTP session.