Yealink CP925 - Deleting a Blocklist Contact; Deleting All Blocklist Contacts; Moving a Blocklist Contact to the Local Directory; Mobile Contacts

Directory
59
Deleting a Blocklist Contact
If you want to answer a call from a specific contact, you need to remove it from the Blocklist.
Procedure
1.
Go to > Local Directory > Blocklist.
2.
Tap the desired blocklist contact.
3. Select Delete.
The phone prompts you to delete the contact or not.
4. Select OK.
Deleting All Blocklist Contacts
You can delete all contacts from the Blocklist when you are ready to answer calls from them again.
Procedure
1.
Go to > Local Directory > Blocklist.
2.
Long tap a contact.
3.
Tap the radio box on the top-right of the screen.
4.
Select > Delete.
The phone prompts you to delete all contacts or not.
5. Select OK.
Moving a Blocklist Contact to the Local Directory
You can move a blocklist contact to a Local Directory. Incoming calls from this contact will not be rejected auto-
matically.
Procedure
1.
Go to > Local Directory > Blocklist.
2.
Tap the desired blocklist contact and select .
3. Select Local Directory from the Group field.
4. Select Done.
Mobile Contacts
The mobile phone contacts will be imported to your IP phones and stored under the Mobile Contacts directory.
You can save mobile contacts to the local directory, but you cannot save a local contact to the Mobile Contacts dir-
ectory.
Note: If you disconnect the Bluetooth-enabled mobile phone from phone or disable the phone to synchronize phone contacts,
the mobile contacts will not be displayed.
Topics
Saving a Mobile Contact to the Local Directory
Searching for Mobile Contacts
Updating the Mobile Contacts