Yealink CP960 Teams Edition

| Teams Device Settings | 41
2. Enter the desired name in the Device Name field.
Related tasks
Activating the Bluetooth Mode
Enabling the Media Audio
You can enable the media audio feature to use the phone as a Bluetooth speaker for your mobile phone or
PC.
Procedure
1.
Navigate to > Settings > Device Settings > Bluetooth.
2. Long tap the connected mobile phone/PC and select Details.
3. Enable Media audio.
4. Tap OK.
Disabling the Phone Audio
By default, the phone audio is enabled, so the phone can act as a speaker and microphone for your
connected mobile phone. The call is made through your mobile phone, but the audio is present on the
phone. You can disable it.
Procedure
1.
Navigate to > Settings > Device Settings > Bluetooth.
2. Long tap the connected mobile phone and select Details.
3. Disable Phone audio.
4. Tap OK.
Disabling Your Device Discovery
After the Bluetooth is turned on, your device is visible to other Bluetooth-enabled devices by default. You
can disable this feature not to allow your device to be discovered by other Bluetooth devices.
Procedure
1.
Navigate to > Settings > Device Settings > Bluetooth.
2. Turn off Open Discover.
Renaming the Paired Bluetooth Devices
You can rename the paired Bluetooth devices for better recognition.
Procedure
1.
Navigate to > Settings > Device Settings > Bluetooth.
2. Long tap the paired device and then select Details.
3. Enter the desired name in the Rename field.
4. Tap OK.
Disconnecting the Bluetooth Device
You can disconnect the Bluetooth device from your device. After the Bluetooth device is disconnected, it
stays in the paired devices list, so that you can easily connect it to your device next time.