| Wireless Network | 44
Wireless Network
The Teams device supports the Wi-Fi feature. If there is available Wi-Fi, you can enable the Wi-Fi feature to
connect the device to the wireless network.
• Activating the Wi-Fi Mode
• Connecting to the Wireless Network
• Viewing the Wireless Network Information
• Disconnecting the Wireless Network Connection
• Deactivating the Wi-Fi Mode
Activating the Wi-Fi Mode
Procedure
1.
Navigate to > Settings > Device Settings > Wi-Fi.
2. Turn on Wi-Fi.
Connecting to the Wireless Network
There are three ways to connect the device to the wireless network:
• Connecting to an Available Wireless Network Manually
• Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
• Adding a Wireless Network manually
Connecting to an Available Wireless Network Manually
Before you begin
Get the password of the wireless network from your system administrator. Make sure that the Wi-Fi mode
is activated.
Procedure
1.
Navigate to > Settings > Device Settings > Wi-Fi.
2.
Select > Scan to search the available wireless network.
3. Select the desired wireless network.
4. If the network is secure, enter its password.
5. Select CONNECT.
Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks,
which can automatically configure a wireless network with a network name (SSID) and strong WPA data
encryption and authentication.
To Next Page
Loading...
