| Setting the Camera | 23
Parameter Description
Gain Limit
Specify the value.
The value can be any integer from 1 to 15.
Default: 15.
Wide Dynamic Range
Off or Specify the WDR. The value represents the compression degree
of the dynamic range
Cameras with WDR technology can work perfectly both in the bright
and the dark conditions and present clear images that balances
different lighting, so that you can identify the details.
• Off-do not use WDR.
• 1~5
Default: Off.
Metering
Configure the value of metering.
• Average
• Middle Zone
• Bottom
• Top
Default: Average.
Configuring Manual Exposure Mode
Manual exposure mode allows you to achieve a combined exposure of the camera aperture size and the
shutter speed.
Procedure
1. On the idle screen, tap Settings > General > System Settings > Exposure Settings.
2. Select Manual Exposure from the pop-up menu of Exposure Mode.
3. Configure and save the following settings:
Parameter Description
Gain Limit
Specify the value.
Default: 2.
Wide Dynamic Range
Off or Specify the WDR. The value represents the compression degree of
the dynamic range
Cameras with WDR technology can work perfectly both in the bright and
the dark conditions and present clear images that balances different
lighting, so that you can identify the details.
• Off-do not use WDR
• 1~5
Default: Off.
To Next Page
Loading...
