| Using BYOD Mode | 30
2. Select the screen you want to share and then click Start Sharing.
Stopping Sharing Content via WPP20
About this task
Procedure
Do one of the following to stop sharing content:
• Remove WPP20 from your computer.
• On the WPP20, press the presentation button.
• On the Yealink Wireless Presentation Pod software, click Stop Sharing.
Using BYOD Mode
BYOD stands for bring your own device. After entering BYOD mode, you can take MeetingBar A20/A30
as the peripherals for meetings hold by third-party apps. When holding a meeting on the PC, you can use
the camera, speaker, and microphone of MeetingBar A20/A30 and display the PC content on the screen
connected to MeeetingBar A20/A30.
Procedure
1. In the idle state, do one of the following:
• Use a USB Type-C cable to connect VCH51 Video Conferencing Hub and the PC.
• Use a USB Type-C to Type-A cable and an HDMI cable to connect VCH51 Video Conferencing Hub
and on the PC.
2. CTP18 will prompts “Switch to BYOD passthrough” , tap Switch.
MeetingBar A20/A30 will enter the BYOD mode and you can control its camera, adjust the volume,
mute/unmute the speaker, and enable the Auto Framing feature.
To Next Page
Loading...
