Yealink MVC940 Deployment Guide

| Basic Settings of Teams Room Systems | 53
• Enabling Tracking Mode
• Controlling Camera
• Resetting the Camera to Home Position
• Creating the Preset Position on the Yealink RoomConnect Plug-in
• Setting Camera to the Preset Position
Enabling Manual Control Mode
Procedure
1.
Tap to go to the Camera Control page.
If you are in a meeting, tap > to go to the Camera Control page.
2. If you use MVC940/MVC900/MVC900
Ⅱ,
select the corresponding UVC84/UVC80 camera.
3. Select .
4. Disable Tracking Mode.
For UVC40, select OFF from the drop-down menu of Tracking Mode.
Note: The settings among the cameras of MVC940/MVC900/MVC900
Ⅱ
are independent of
each other. In other words, other cameras' settings remain unchanged, even though you change
the settings of one camera.
Enabling Tracking Mode
The tracking mode feature contains the auto framing and the speaker tracking. With the real-time face
detection and position tracking, the auto framing feature can automatically adjust the camera according
to the number and the position of the participants, covering every participant in the conference. Moreover,
the speaker tracking feature, based on the auto framing feature, can automatically detect the speaking
participant and zoom in his video image, providing an optimal close-up of the speaker. UVC40 supports
both the auto framing and the speaker tracking features, while UVC84/ UVC80/UVC50/UVC30 supports
the auto framing feature only.
About this task
When you enable the tracking mode feature, you cannot control the UVC40/UVC30 Room camera, but you
can control the UVC84/UVC80/UVC50 or use its preset position. After you manually adjust the UVC84/
UVC80/UVC50, the tracking mode feature is temporarily turned off. If you need to use it again, you need to
press the tracking mode key on the remote control to turn it on.
Procedure
1.
Tap to go to the Camera Control page.
If you are in a meeting, tap > to go to the Camera Control page.
2. If you use MVC940/MVC900/MVC900
Ⅱ,
select the corresponding UVC84/UVC80 camera.
3. Select .
4. Enable Tracking Mode.
For UVC40, select Auto Framing or Speaking Tracking.
Note: The settings among the cameras of MVC940/MVC900/MVC900
Ⅱ
are independent of
each other. In other words, other cameras' settings remain unchanged, even though you change
the settings of one camera.
Related concepts
VCR20 Remote Control

Yealink MVC940 Specifications

General

Reset slot	Yes
USB connector type	USB Type-A, USB Type-B
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
HDMI output ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	4
Display diagonal	11.6 \
Touchscreen type	Capacitive
Megapixel	- MP
Camera type	Single camera
Sensor type	CMOS
Optical zoom	12 x
Image sensor size	- \
Diagonal field of view	80 °
Vertical field of view	45 °
Horizontal field of view	73 °
Harmonized System (HS) code	85176990
Pan range	0 - 200 °
Product type	Group video conferencing system
Product color	Black
Tilt angle range	0 - 130 °
Bluetooth version	5.2
Number of cameras	2
Number of persons	- person(s)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Processor family	Intel® Core™ i5
Computer system type	Mini PC
Operating system installed	Windows 10 IoT Enterprise
Internal memory	8192 MB
Storage media type	SSD
Total storage capacity	128 GB
Maximum video resolution	3840 x 2160 pixels
Telepresence	-
Trusted Platform Module (TPM) version	2.0
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Interface module RJ-45 ports quantity	7

Weight and Dimensions

Weight	12100 g
Package depth	413 mm
Package width	935 mm
Package height	312 mm
Package weight	13800 g