Yealink MVC940 Deployment Guide

| Basic Settings of Teams Room Systems | 55
7. Tap New Preset to create a new preset.
Note: If you are using the Yealink Room Connect for the first time, tap Skip to manage the
devices locally, or you can manage the devices on the Yealink Device Management Platform
or Yealink Management Cloud Service. The settings among the cameras of MVC940/MVC900/
MVC900
Ⅱ
are independent of each other. In other words, other cameras' settings remain
unchanged, even though you change the settings of one camera.
For more information on how to use the Yealink RoomConnect plug-in, refer to Yealink
RoomConnect User Guide.
Related tasks
Administrator Account Login
Setting Camera to the Preset Position
When UVC40/UVC30 Room camera is in manual control mode, you can adjust them to a preset position.
For UVC84/UVC80/ UVC50, you can adjust them to a preset position at any time.
Before you begin
Preset positions have been added in the Yealink RoomConnect plug-in.
Procedure
1.
Tap to go to the Camera Control page.
If you are in a meeting, tap > to go to the Camera Control page.
2. If you use MVC940/MVC900/MVC900
Ⅱ,
select the corresponding UVC84/UVC80 camera.
3. Select a desired preset position.
The camera will be set to the preset position.
Note: The settings among the cameras of MVC940/MVC900/MVC900
Ⅱ
are independent of
each other. In other words, other cameras' settings remain unchanged, even though you change
the settings of one camera.
Related tasks
Creating the Preset Position on the Yealink RoomConnect Plug-in
Enabling Manual Control Mode
Setting UVC30 Camera as the Content Camera
You can use the UVC30 camera as the primary camera in the meeting room or as a content camera. A
content camera interacts with a whiteboard to allow a presenter to draw on a whiteboard and share the
content with remote participants.
Before you begin
Before using the content camera, you need to set the UVC30 camera as the Content Camera mode on
both Yealink RoomConnect plug-in and Microsoft Teams app.
About this task
Attention: When you use UVC30 Room as the content camera, you cannot use the PTZ control,
camera preset, people counting and auto-framing features.
For more information about how to install, set and us the content camera, refer to Content cameras.
• Setting the Content Camera Mode on Yealink RoomConnect Plug-in
• Setting the Content Camera

Yealink MVC940 Specifications

General

Reset slot	Yes
USB connector type	USB Type-A, USB Type-B
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
HDMI output ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	4
Display diagonal	11.6 \
Touchscreen type	Capacitive
Megapixel	- MP
Camera type	Single camera
Sensor type	CMOS
Optical zoom	12 x
Image sensor size	- \
Diagonal field of view	80 °
Vertical field of view	45 °
Horizontal field of view	73 °
Harmonized System (HS) code	85176990
Pan range	0 - 200 °
Product type	Group video conferencing system
Product color	Black
Tilt angle range	0 - 130 °
Bluetooth version	5.2
Number of cameras	2
Number of persons	- person(s)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Processor family	Intel® Core™ i5
Computer system type	Mini PC
Operating system installed	Windows 10 IoT Enterprise
Internal memory	8192 MB
Storage media type	SSD
Total storage capacity	128 GB
Maximum video resolution	3840 x 2160 pixels
Telepresence	-
Trusted Platform Module (TPM) version	2.0
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Interface module RJ-45 ports quantity	7

Weight and Dimensions

Weight	12100 g
Package depth	413 mm
Package width	935 mm
Package height	312 mm
Package weight	13800 g