Yealink SIP-T20P User Manual

User Guide SIP-T20P IP Phone
94
Environmental Requirements

Place the device at a well-ventilated place. Do not expose the device under
direct sunlight.

Keep the device dry and free of dusts.

Place the device on a stable and level platform.

Please place no heavy objects on the device in case of damage and
deformation caused by the heavy load.

Keep at least 10 cm between the device and the closest object for heat
dissipation.

Do not place the device on or near any inflammable or fire-vulnerable object,
such as rubber-made materials.

Keep the device away from any heat source or bare fire, such as a candle or
an electric heater.

Keep the device away from any household appliance with strong magnetic
field or electromagnetic field, such as a microwave oven or a refrigerator.
Operating Requirements

Do not let a child operate the device without guidance.

Do not let a child play with the device or any accessory in case of accidental
swallowing.

Please use the accessories provided or authorized by the manufacturer only.

The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.

Before plugging or unplugging any cable, make sure that your hands are
completely dry.

Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet basement
or near a swimming pool.

Do not tread on, pull, or over-bend any cable in case of malfunction of the
device.

During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital Subscriber
Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.

If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.

When there is smoke emitted from the device, or some abnormal noise or
smell, disconnect the device from the power supply, and unplug the power
plug immediately. Contact the specified maintenance center for repair.

Do not insert any object into equipment slots that is not part of the product or
auxiliary product.

Before connecting a cable, connect the grounding cable of the device first.
Do not disconnect the grounding cable until you disconnect all other cables.

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g