User Guide SIP-T20P IP Phone
76
When the phone prompts you to answer an incoming call
The Record/ URL Record key is not available:
When there are no connected calls on your phone
When you place a new call
To record a call:
1. Press the Record key or URL Record key during a call.
If the recording starts successfully, the Record or URL Record key LED flashes green.
2. Press the Record key or URL Record key again to stop recording.
The Record or URL Record key LED turns off.
You can listen to the recordings which stored on your server system. For example, you
can dial an access code.
Note
Intercom is a useful feature in an office environment to quickly connect with the operator
or the secretary. You can press the configured intercom key to automatically connect
with a remote extension for outgoing intercom calls, and the remote extension will
automatically answer the incoming intercom calls.
Note
To configure an intercom key via phone user interface:
1. Press .
2. Select Features->DSS Keys.
3. Select the desired DSS key.
4. Press or to select Intercom from the Type field.
5. Select the desired line from the Account ID field.